概要
The 31320 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with a Type N antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes:
- Bi-directional coaxial RF protector with hardware, suitable for 700 to 2700 MHz
- Flange mounting bracket
- 18 in. Type N to Type N coaxial jumper
- 24 in. ground wire assembly
Note: For a pre-installed, bulkhead-mounted version of this same kit, see the 31318 Bulkhead Surge Protection Installed in Enclosure, Type N to N, 700 to 2700 MHz.
利点と特徴
- Superior coil inductor surge performance design
- Weatherproof when installed
イメージ
類似製品
仕様
Coaxial Jumper |
|
| Connector 1 | Type N plug |
| Connector 2 | Type N plug |
| Cable | RG174/U |
| Length | 45.7 cm (18 in.) |
Surge |
|
| Frequency | 700 to 2700 MHz |
| Connectors | Type N jack |
| Mounting | Bulkhead mount |
| Operation |
|
| Insertion Loss | < 0.1 dB |
| Maximum Surge |
|
| Temperature | -50° to +85°C |
| Materials | Tri-plated brass body, PTFE dielectric, tri-metal center pins, SS 5/8-24 hex nut, SS 5/8 lock washer, silicon O-ring |
| Standards | CE compliant, RoHS compliant, IEC 60529 IP67, Bellcore #TA-NWT-000487 |
| Body Diameter | 3.0 cm (1.18 in.) |
| Type N Connector Length | 2.41 cm (0.95 in.) |
| Total Length | 9.17 cm (3.16 in.) |
Flange Mount |
|
| Material | Aluminum with stainless-steel screws, nuts, and washers |
| Dimensions | 3.81 x 2.54 x 2.85 cm (1.5 x 1.0 x 1.12 in.) |
Ground Wire |
|
| Wire Type | 12 AWG stranded with PVC jacket |
| Connector | 5/8 crimp ring lug, soldered |
| Length | 61 cm (24 in.) |
ドキュメント
以下に記載
下記の製品は置き換えられました
Privacy Policy Update
We've updated our privacy policy. 詳細はこちら
Cookie Consent
Update your cookie preferences. クッキーの設定を更新する