Toggle navigation
製品
ソリューション
サポート
会社概要
ホーム
製品
ソリューション
サポート
会社概要
見積リスト
お問い合わせ
地域別ウェブサイト
地域別ウェブサイト
Africa
Australia
Brasil
Canada
Centro Caribe
Deutschland
España
Europe
France
India
Japan
United States
ภาษาไทย
中国
その他の国
ログイン
よくある質問
当社の製品とソリューションに関するよくある質問
ご質問はこちら
ご質問はこちら
検索
All FAQs
(1994 total: showing 1901-1920)
Is it possible to watch real-time online images using the CC640 and a suitable data logger? How it is possible to retrieve data from the camera, as there is only one RS-232 terminal on the data logger, which is usually used for a GPRS device?
Can a digital camera be used with an RF network to transmit images back to the office using LoggerNet?
Is there an existing port on the CR10X that can house a RS-232 one-wire interface device?
Is there a minimum 12-channel data logger available that can send data to an Internet server by GPRS?
Is the observational data maintained in a CR10X if ac power is lost when data is written in the final storage area? Can the data of the final storage area be read by an internal program when ac power is restored?
Can the CR10X communicate piezometer data easily with a Wonderware SCADA system for data display?
Can the CR10X send data out the serial port to be parsed by another instrument? If so, is this automatic, programmed, or a response to a command from another instrument?
How many data lines can a SM192 and a SM4M store using a simple program?
How can the CNR1 be connected to a Bowen Ratio system?
Does the CNR1 read out the values of incoming and reflected components separately, or does it just give the net value?
How high above the ground should a net radiometer be placed?
How many solar panels can be connected to a CH100 regulator? Can one 60 W solar panel and two 20 W solar panels be connected to the same regulator?
USB と DB9 (RS-232) コネクタ間のピン接続は何ですか?
既存の風向計を05103-L、05103-45-L、05106-L、05305-Lに交換する場合、データロガー プログラムで乗数とオフセット以外の値も変更する必要がありますか?
229-L はどのように校正できますか?
229-L からの読み取り値はどのように取得されますか?
229-L の校正は可能ですか?
複数の 229-L プローブが dT に対して非常に低い正の値と負の値を返し始めた場合、その原因は何でしょうか?
CR10X と非常に低いセンサ信号 (1 mV 以下) を備えたマルチプレクサを使用する場合、AM25T または AM16/32 を使用する必要がありますか? AM25T と AM16/32 は、どのセンサ信号電圧とセンサインピーダンスに使用できますか?
AM25Tはどのように使用すればよいですか?
戻る
次へ