Toggle navigation
製品
ソリューション
サポート
会社概要
ホーム
製品
ソリューション
サポート
会社概要
見積リスト
お問い合わせ
地域別ウェブサイト
地域別ウェブサイト
Africa
Australia
Brasil
Canada
Centro Caribe
Deutschland
España
Europe
France
India
Japan
United States
ภาษาไทย
中国
その他の国
ログイン
よくある質問
当社の製品とソリューションに関するよくある質問
ご質問はこちら
ご質問はこちら
検索
All FAQs
(1994 total: showing 761-780)
現在のバージョンのライセンスに対して LoggerNet アップグレードを購入した場合、アップグレードはどのように機能しますか? アップグレードのプロセスは何ですか?
パッチとアップグレードの違いは何ですか?
How can the TCP/IP stack in a CR1000 or CR3000 be used?
Can the NL120 be repaired? Or does a non-functioning interface need to be replaced?
What might cause connection issues between a CR1000 or CR3000 and an NL120, resulting in lost data?
If several CR1000 or CR3000 dataloggers only have a serial interface that is used as the data highway to a SCADA network, can an NL120 be added without interfering with the current serial port data communications system?
To communicate with a CR1000 or CR3000 by TCP/IP using an NL120 or NL240, is it necessary for the data logger to have a fixed IP address?
If a CR1000 or CR3000 is connected to an NL120 and it has been assigned an IP address, can configuration changes be made on the data logger using only the IP connection?
LoggerNet に NL120 がリストされていない場合でも、問題ありませんか?
If a CR1000 or CR3000 is paired with an NL120 for remote access, can a second data logger be connected to the first data logger and the NL120 pull data from both data loggers?
Can a Wi-Fi device be plugged into the NL120 so that data logger communication can occur using a Wi-Fi service?
Does an NL120 work with a wireless Ethernet bridge?
Can an NL120 be used to connect multiple CR1000 or CR3000 dataloggers to the Internet?
Is there any way to update the firmware of the NL120?
Can a COM port and an NL120 be used together?
Can the NL120 be used to produce analog voltages?
Can a PDA with PConnectCE be used to set values?
Does PConnectCE allow a user to set up the same type of communication links as with LoggerNet?
After installing PConnectCE on a PDA, how is the software accessed?
If a Windows Mobile device and a PC are synchronized, does PConnectCE have to be installed on both the Windows Mobile device and the PC?
戻る
次へ