概要
The CM410-BF is used primarily to mount a pair of pyranometers to a driven pile, leveraging the CM275 Albedometer Mounting Kit. The included 15.24 cm (6.0 in.) hook bolts accommodate an I-beam style pile with flange dimensions 7.6 to 12.7 cm (3 to 5 in.), such as a W6x12. Albedo is a common measurement parameter selected for a SunSentry Solar Operational Meteorological Monitoring Station. Installation details, including the recommended pile exposure height and orientation, are found in the SunSentry Installation Guide. To minimize localized glare and reflections that can adversely influence albedo measurements, the all-black version of the CM410 is recommended for albedo.
Alternately, you can use the CM410-BF as a general mount, such as for the following sensors: an all-in-one weather sensor (ClimaVue™ series), a surveillance camera (CCFC), a snow-depth sensor (SnowVue™10), or a temperature probe (TempVue™ series). Candidate mounting structures include a wood pole, the side of a building, a bridge girder, etc.
The CM410-BF has a matte black finish. If you would like the same pile mount arm without a finish, order the CM410 instead.
Note: In the image, the darkened components are included with the CM410-BF.
イメージ
仕様
| Finish | Matte black |
| Crossarm Material | 1 in. NPS aluminum pipe |
| Hardware Material | Galvanized, stainless steel |
| Other Material | Aluminum (base and struts) |
| Pipe Outer Diameter | 3.34 cm (1.315 in.) |
| Horizontal Length | 1.5 m (5.0 ft) |
| Vertical Rise | 0.8 m (2.7 ft) from bottom of base |
| Weight | 4.9 kg (10.9 lb) |
互換性
注意： 以下は代表的な互換性情報を示しています。互換性のある製品や互換性のない製品をすべて網羅したリストではありません。
Sensors
| 製品 | 互換性 | 注意 |
|---|---|---|
| ClimaVue 40 | ||
| ClimaVue 50 G2 | ||
| MS-80-L | ||
| MS-80SH-L | ||
| SnowVue 10 | ||
| SR30-L |
その他
| 製品 | 互換性 | 注意 |
|---|---|---|
| 34344 |
以下に記載
Privacy Policy Update
We've updated our privacy policy. 詳細はこちら
Cookie Consent
Update your cookie preferences. クッキーの設定を更新する